|
Go back to EPS Epoxy Surfboard Ding Repair Page 1 "Tools and Materials"
EPS Epoxy Surfboard Ding Repair Step 2: "Ding Prep"
 Step 2: "Ding Prep". Make sure the surfboard ding has dried out completely. Moisture left in the foam will cause discoloration and delamination over time. For this ding I cut out the compromised area using a mitre box saw and a razor blade.
EPS Epoxy Surfboard Ding Repair Cut Out
The rail cuts were made using the mitre box saw and the deck and bottom cuts were made using a razor blade. Wear Eye Protection! Once the fiberglass is removed carefully cut the foam using the razorblade.
EPS Surfboard Ding Repair Cut Out - Rail View
EPS Epoxy Surfboard Ding Repair Cut Out - Deck View
EPS Epoxy Surfboard Ding Repair Cut Out - Bottom View
Go to EPS Epoxy Surfboard Ding Repair Page 3 "Filling the Ding"
|
